Our Plast-O-Care is an effective skim coat. Available in powder form, it is easy to use. Having white color, it is based on white cement, well-chosen polymers & fillers. It is a water-resistant plaster, practical in 1 to 2 mm thickness per coat. This coating product is perfect for smooth even surfaces (walls & ceilings). It can be used on plasters, brick, RCC, or block work etc. 

Direction For Use:

• Clean the surface, and remove dust, dirt, oil, grease etc.
• Dampen the concrete or plastered surface, before use.
• If surface has pores, then treat the surface with SBR diluted 1.
• Mix 350-390 ml of clean water to 1 kg of Plast-O-Care.  
• Mix thoroughly, and keep it for 5-10 minutes.
• Re-mix to obtain even consistency of paste.
• Apply the paste on plaster / concrete surface with putty blade or spatula.  

Packing: Available in 20 kg and 40 kg HDPE packing. 

Primary Uses: 

• Paint to walls and ceilings.
• Plasters, brick, RCC etc.

Shelf Life: The Plast-O-Care has a shelf life of 1 year, if stored in the original packing.  

Specification:

• Form: Fine Powder  
• "">Binder: Cement  
• Fillers: Selected mineral fillers
• Maximum Aggregate Size: 500 micron
• Plastic Density: 2.0
• Bulk Density: 1.05
• Yield: 700 ml / kg.
• Water Requirement: 350 to 390 ml / kg
• Coverage: 1.2 kg / m² / mm
• Pot Life: 3 hours
• Adhesion To Concrete: 10 kg / cm²