Concrete Repair Mortar

Next > >

<< Previous

Send Inquiry

Product Code : 302

Price And Quantity

Minimum Order Quantity
50
Unit of Measure
Kilograms/Kilograms,

Price
31 INR

Product Specifications

Type
Roofing Felts
Material
Concrete Repair

Thickness
2.2 Millimeter (mm)
Density
.13 Kilogram per litre (kg/L)

Color
Grey
Width
3.0 Millimeter (mm)

Product Description

Concrete Repair Mortar

Keeping track with market development, we offer supreme quality Concrete Repair Mortar that is a milky white liquid based on Styrene Butadiene Rubber. The offered solution is used to mix with cement to form bonding slurry mortar that makes a strong repairing material. Processed using the utmost quality basic material and latest production techniques at par with the set industry standards, this Perma Concrete Repair Mortar is offered at industry leading price.

Features:

Superior adhesive property
Stability
High effectiveness
Accurate composition

Typical Applications: Corrosion inhibitor for rebars, additive for high strength structural or flooring repairs and heavy duty waterproofing.

Packing: Concrete Repair Mortar can be made available in 100 ml, 500 ml, 1 Litre, 5 Litre, 10 Litre, 25 Litre, 100 Litre and 200 Litre drums.

Primary Uses :

Used for floor screed and concrete repairs.
Provides corrosion protection to steel.
Floor screed and topping.
Bonding of new as well as old concrete.
Tanking and Waterproofing of floors & basements.

Advantages

Water resistant
Excellent adhesion to steel, brick, concrete, stones.
Compatible with cement, highly compressive, provided with tensile & flexural strength.
Resistant to mineral oils, ingress of salts etc.
Non toxic, suitable for utilization in potable water tanks.
Provided with outstanding corrosion protection.
Cost-efficient than epoxy mortars.

Directions For Use

Method:

Use passivator coating of SBR with cement suspension.
The Concrete Repair Mortar can be applied on the clean and preconditioned wet surface as a bonding slurry.
Then application of Perma Bond SBR modified mortar is needed via trowel or float so as to make a consistent smooth surface. As a bonding slurry it sets extremely fast thus modified mortar application should be quickly done, instantly after the application of bonding slurry.
Damp cure for 24 hours and leave it to dry off.

Preparation: Passivator coat / Bond
Coat Suspension = Cement 1 + SBR 1
NOTE: The slurry sets really fast. 1 ltr of this product is mixed with 1 kg of cement so as to provide a slurry that covers 20 to 25 sq.ft.

Coverage:

(a) Bond Coat 1:1 (SBR:Cement) 20-25 sqftyitr.

(b) Polymer modified mortar 1:5:15 shall cover an area of 15 sqft./Itr.

Trade Information