Anchor Grouts

With wide industry experience and knowledge of this domain, our firm has become instrumental in offering Perma Anchor Grouts that are basically thixotropic thixotropic polyster grouts. The offered grouts are suitable to be used in places that demands better joint strengths such as fixing of foundation bolts. Processed with the help of advanced techniques using optimal quality chemicals, these grouts are also tested on defined quality parameters by our quality inspectors to ensure their purity. Furthermore, we offer these Perma Anchor Grouts to the clients in different moisture-free packaging options at reasonable prices.

Features:

Description:

Anchor Grouts vended by us are sold under the brand name “Perma Anchor Fix – 80”, which is considered as a polyester resin based grout. This grout mix is widely used for high early & ultimate strengths. Also, it ensures good chemical resistance properties. It is used for steel bars anchoring into concrete, masonry, brickwork, etc. Our anchor grouts are effective for anchoring, repairing and bonding. 

Primary Uses: 

• Used for dowel bars installation in concrete. 
• Provide starter bars in RCC structures.
• Ideal for vertical / horizontal / overhead use.  
• Used for fixing foundation bolts, rail tracks and base plates etc. 

Advantages:    

• Easy to mix & apply
• Rapid strength gain
• Corrosion resistant
• Economical & effective

TYPICAL APPLICATION:

Used for installation of dowel bars, providing starter bars in RCC structures for fixing foundation bolts etc.

Directions For Use

Bulletined below instructions should always be kept into consideration while using the offered Anchor Grouts:

• Using hammer drills, the holes are drilled for the anchor in order to obtain the rough internal surface.
• Before grouting, clean all the holes using compressed air to ensure that no loose ground material is present into them that can affect the surface bond.
• Inhibitor and base liquid are thoroughly mixed for obtaining a homogenous mix and filler powder is added to obtain the smooth consistency.
• Carefully fill the holes with this paste to ensure that the holes have been effectively filled from the bottom to eliminate the entrapping of air into the hole.
• Now, insert the bolt, anchor and dowel rod in the filled hole to hold the position until it becomes firm and rigid.
• Tooling is done at the mouth of hole for making its surface even.

Properties

Our offered Perma Anchor Fix- 80 is highly demanded because of its free flowing nature. It is important to keep in view its temperature of application that may range from 5 to 40 degree Celsius. However, its service temperature ranges from -20 to 60 degree Celsius.

Compressive Strength

Within four, twenty four hours of application, the compressive strength may vary from 20 to 50 N/ mm². And, its tensile strength is 30 N/mm².

Coverage

Perma Anchor Fix-80 renders the density 2.20 and one kilogram of paste offers 455 CC volume.

Chemical Resistance

The mentioned product shows high resistivity against oil, petrol, acids, diesel, alkalies, saline and fresh water.

Health and Safety

While working with Anchor Grouts, it is essential to carefully handle it by wearing hand gloves and masks in order to avoid any harm to the skin. It is should be applied in well ventilated area as its quite flammable.

Packing

Depending upon the requirement, clients' can avail this product in packaging of 250 gm and 1 kg.

Shelf Life

If stored under proper conditions, it may work effectively for six months from the date of manufacturing.

Product Details: